Jeep Suspension

YJ Wrangler and CJ

Applications:

*Shocks listed are recommended mono-tubes and are sold separately unless otherwise specificed

Part #
JT7099
RE5015	1987-1995	YJ Wrangler	5.5" +	Spring-Over conversion	RXJ501	RXJ507	35x12.50	8" W, 3.5-4.5" B.S.	Vehicle will require alignment after kit is installed. TJ must use with SYE kit and C/V drive shaft. LJ may use RE2100 t case drop. Recommend using high steer conversion. Front drive shaft modification may be necessary System is not recommended to be combined with body lifts over 1" tall. All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
RE5015M	1987-1995	YJ Wrangler	5.5" +	Spring-Over conversion	inc	inc	35x12.50	8" W, 3.5-4.5" B.S.	Vehicle will require alignment after kit is installed. TJ must use with SYE kit and C/V drive shaft. LJ may use RE2100 t case drop. Recommend using high steer conversion. Front drive shaft modification may be necessary System is not recommended to be combined with body lifts over 1" tall. All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
RE5015T	1987-1995	YJ Wrangler	5.5" +	Spring-Over conversion	inc	inc	35x12.50	8" W, 3.5-4.5" B.S.	Vehicle will require alignment after kit is installed. TJ must use with SYE kit and C/V drive shaft. LJ may use RE2100 t case drop. Recommend using high steer conversion. Front drive shaft modification may be necessary System is not recommended to be combined with body lifts over 1" tall. All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
RE51212
RE51213
RE51222
RE51223
RE51412
RE51422
RE5505	1987-1995	YJ Wrangler	2.5"	Standard spring system	inc	inc	31x10.50	8" W, 3.5-4.5" B.S.	Vehicle will require alignment after kit is installed. All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
RE5505-NS
RE5515	1987-1995	YJ Wrangler	4"	Standard spring system	inc	inc	33x12.50	8" W, 3.5-4.5" B.S.	Vehicle will require alignment after kit is installed. Recommend using Drop Pitman arm RE2500 w/power, RE2504 manual steering Recommend using SYE kit and C/V drive shaft Rear pinion shims required if CV driveshaft used System is not recommended to be combined with body lifts over 1" tall. All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
RE5515-NS
RE5520	1987-1995	YJ Wrangler	4.5"	Extreme Duty Leaf spring system	RXJ503	RXJ508	33x12.50	8" W, 3.5-4.5" B.S.	Vehicle will require alignment after kit is installed. TJ must use with SYE kit and C/V drive shaft. LJ may use RE2100 t case drop. Rear pinion shims required if CV driveshaft used System is not recommended to be combined with body lifts over 1" tall. All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
RE5520M	1987-1995	YJ Wrangler	4.5"	Extreme Duty Leaf spring system	inc	inc	33x12.50	8" W, 3.5-4.5" B.S.	Vehicle will require alignment after kit is installed. TJ must use with SYE kit and C/V drive shaft. LJ may use RE2100 t case drop. Rear pinion shims required if CV driveshaft used System is not recommended to be combined with body lifts over 1" tall. All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
RE5520T	1987-1995	YJ Wrangler	4.5"	Extreme Duty Leaf spring system	inc	inc	33x12.50	8" W, 3.5-4.5" B.S.	Vehicle will require alignment after kit is installed. TJ must use with SYE kit and C/V drive shaft. LJ may use RE2100 t case drop. Rear pinion shims required if CV driveshaft used System is not recommended to be combined with body lifts over 1" tall. All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
RE5521
RE5522
RE5523
RE5524
RE5525	1976-1986	CJ5 & CJ7	4.5"	Extreme Duty Leaf spring system	RXJ508	RXJ508	33x12.50	8" W, 3.5-4.0" B.S.	Vehicle will require alignment after kit is installed. Recommended using CV drive shaft with Spicer conversion yoke Rear pinion shims required if CV driveshaft used 76-81 Disk brake CJ7 and all Disk brake CJ5 use RE1552 front brake lines. No front brake lines available for front drum brakes. Late 86 CJ7 may have D44 rear axle. Use RE2445 rear U-bolts. System is not recommended to be combined with body lifts over 1" tall. All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc). M300 t-case use 2-4-4341 yoke, M20 t-case use 2-6-4061x yoke
RE5525M	1976-1986	CJ5 & CJ7	4.5"	Extreme Duty Leaf spring system	inc	inc	33x12.50	8" W, 3.5-4.0" B.S.	Vehicle will require alignment after kit is installed. Recommended using CV drive shaft with Spicer conversion yoke Rear pinion shims required if CV driveshaft used 76-81 Disk brake CJ7 and all Disk brake CJ5 use RE1552 front brake lines. No front brake lines available for front drum brakes. Late 86 CJ7 may have D44 rear axle. Use RE2445 rear U-bolts. System is not recommended to be combined with body lifts over 1" tall. All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc). M300 t-case use 2-4-4341 yoke, M20 t-case use 2-6-4061x yoke
RE5525T	1976-1986	CJ5 & CJ7	4.5"	Extreme Duty Leaf spring system	inc	inc	33x12.50	8" W, 3.5-4.0" B.S.	Vehicle will require alignment after kit is installed. Recommended using CV drive shaft with Spicer conversion yoke Rear pinion shims required if CV driveshaft used 76-81 Disk brake CJ7 and all Disk brake CJ5 use RE1552 front brake lines. No front brake lines available for front drum brakes. Late 86 CJ7 may have D44 rear axle. Use RE2445 rear U-bolts. System is not recommended to be combined with body lifts over 1" tall. All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc). M300 t-case use 2-4-4341 yoke, M20 t-case use 2-6-4061x yoke
RE5526
RE5527
RE5528
RE5528T
RE5529
RE5529T
RE5531
RE5531T
RE5532
RE5532T
RE7122P
RE7122PM
RE7122PT
RE7142P
RE7142PT
RE9922